In the SOLAR system, the EARTH is the only planet which has life & water on it. We are compelled to safeguard the life and the newly invented useful equipments.
 
We would like to introduce ourselves as the sole manufacturer and marketer of 'UES' brand Earthing Electrode (2 Mtr. & 3 Mtr.Length) Both in M.S.G.I & Copper Flat along with Mineral filling Compound. We have been in the electrical market for about four-decades, and our vast experience helped us to identify a suitable Earthing to meet the requirement of today's advanced usage demand.

In the competitive world, our human life has become so mechanical and we are compelled to live with equipments. In order to facilitate, but to create a safer, better reliable environment, a safety device is a must for which our 'UES' Brand Earthing Electrode and Mineral Filling Compound is the ultimate choice.

Our 'UES' Brand Earthing Electrodes & Mineral Filling Compound have earned it's reputation in the field of Electrical, is being used as a protector of human life and safety for valuable equipments. Hence almost all users of our product are placing repeated orders and are proud to reveal their satisfaction to the fellow users.

Since 1996 our company’s R&D wing has invested heavy amount and not to mention the time for the development of this International Standard 'UES' Brand Earthing Electrode and Mineral Filling Compound, to suite all over the world Electricity users.

Earthing is the foundation of Electricity usage but is being neglected grossly. Even though we have developed a far superior quality Earthing following IS 3043 – 1987 still we are finding difficult to change the users from traditional earthing to this advanced method.

It is a known fact that Strip electrodes are better compared to Pipe & even Plate Earthing, which are also good in high resistivity soil conditions and has a mention in the BIS code of practice IS 3043 - 1987.

Technical Superiority over any other Earthing mechanisms:
Basically a good earthing is considered to provide a straight unobstructed (less joints / twists / indirect connections) path for the fault current to flow for instant dissipation. An earthing apparatus which has more cross sectional primary conducting area and more surface area. The more the Surface area & cross sectional primary conducting area the better & quicker dissipation of the fault current takes place.

The primary earthing that we have used in our UES is STRIPS yielding maximum cross sectional primary conducting area and surface area. It also provides a straight unobstructed path for the fault current as our terminal and primary electrode are one and the same removing any joints, which helps in quick dissipation of fault current.

We have shown the cross sectional primary conducting area in our brochures for each of our UES for your ready reference.

It is always advisable to use flat from the mains to connect to our UES.

This is the base on which our UES Brand Earthing Electrodes are designed with the strips as the primary earthing.

Note:

	The size & nos. of Earthing Electrodes should be recommended by your Electrical Consultant Engineers (Elec.) and Contractors depending on your infrastructure requirement.
	Ohmic Value depends on soil conditions wherever it is used.
	Our product can be used in the form of a Grid using 3 or more in nos. duly interconnected for highly sensitive projects and wherever low OHMIC value is required.

For reference in the BIS Book of IS 3043-1987 Code of Practice ,page no.21 sl no 9.2.3. it is stated that Strip electrodes are better compared to Pipe & even Plate earthing, which are also good in high resistivity soil conditions.